Superplasticizer Admixture

PCP I00 IOIL h light brown/yellowish coloured polycaboxylic ether based new generation hyper plasticier confirming to EN specification, developed for specitic application in high performance concrete.

The hyper dispersion effect products by PCP EASE 101L. Exhibits better durability and performance in concrete. PCP EASE 101L is compatible with all portland cement and pozzolonic materials confirming to international standards.

Advantages

• Increases early and ultimate compressive strength.
• Make higher E modules.
• Imparts better resistance to carbonation and aggressive atmospheric effects.
• Reducces permeability.
• Reducces shrinkage and creep.
• Increases durability of concrete.
• Places concrete with zero vibration -reduces labour cost.

Primary appliction areas

• Rheodynamic concrete
• self consolidated concrete
• OPC-Pozzolana concrete
• High volume fly ash concrete

Dosages / Uses

• PCP EASE 101L in the range of 0.3 to 1%  by weight of cement.
• The dosage can be enhanced to further 3% as per requirements, but it is advisable to go for trial mix to determine the optimum dosage.
• The Requisite of CIS LPC-111 Should be added after addtion of minimum 50 tom 70% of gauging water before mising with wet cement aggregate system.

Safety
PCP EASE 101L is non toxic, non flammable and non hazardous, However, any splash on the human bosy should be washed out immediately with plenty of waters.

PCP EASE 102M is a polycarboxylate ether based suerplasticiser and a new type-range water-reducing admixture for concrete grades from M20 to M60. PCP EASE 102M is designed to provide good workability without aegregation confirming to ASTM C-494 Type G, C-1017 and IS 9103:2003.

Advantages

• PCP  EASE 102M Can be used with all types of portland cement and other mixed  cement including fly ash, Ground granulated blast-Furnace Slag, Silica Fume and So on.
• PCP  EASE 102M has higher water reducing ability, and the water reducing rate can be easily controlled by changing the dosages.
• PCP  EASE 102M provides good slump good ability.
• PCP EASE  102M provides a suitable viscoity for concrete, and eliminate excessive bleeding and segregation.
• Use of PCP EASE  102M is an appropriate method to produce high durable concrete with high water reducing ability.

Primary Application Areas

• High strength concrete
• High slump concrete
• Flowing concrete
• Self consolidating concrete and for better specific requirements go for our admixture PCP EASE 102M.

Dosages / Uses
PCP EASE 102M has recommmended dosage range of 0.5 to 1.5%  by weight of cementious material. But the dosage will vary accordingly to concrete material used.

Storage
PCP EASE 102M Should be sored under shad. if frozen it properties can be recovered after  thawing and agitating thoroughly.

Safety
PCP EASE 102M is non toxic , non flammable and non hazardous. However, any  splash on the human body should be washed out immmediatly with plenty of water

Advantages

• Imparts extreme fluidity.
• Allows water reduction (30-50%)
• Higher early & ultimate Strenght.
• Rapid placing with no vibration.
• Improved surface finish, Cohesion.
• Reduced sribkage & cracks.
• Chloride-Free
• Production Denser more durable concrete giving better protection to steel against corrosion.

Primary Application Areas

• High strength concrete
• High slump concrete
• Flowing concrete
• Self consolidating concrete and for better specific requirements go for our admixture PCP EASE 4229.

Dosages / Uses
PCP EASE 4229  has recommmended dosage range of 0.5 to 1.5%  by weight of cementious material. But the dosage will vary accordingly to concrete material used.

Storage
PCP EASE 4229 Should be sored under shad. if frozen it properties can be recovered after  thawing and agitating thoroughly.

Safety
PCP EASE 4229 is non toxic , non flammable and non hazardous. However, any  splash on the human body should be washed out immmediatly with plenty of water.

PCP - NAPLIG FLOW 10ON is a brown ready to use concre superplatiscer, Confirming to the specification of ASTM C 494 type and IS 9103-1999 (Amendment 2003).

Advantages
Better slump retention to achieve potable concrete. Compatible with all type of cement. Increase ultimate strength with maximum water reduction Controls set retardation with optimum dosage.

Dosages/Uses
Generaly dosed 0.5 to 1.5% by weigth of cement anhanced upto 3.5 % depending upon climate condition, but better go for trial mix to determine the optimum dosages.

Safety
PCP-NAPLIG FLOW 100N is non toxic , non flammable and non hazardous. However, any  splash on the human body should be washed out immmediatly with plenty of water

PCP - NAPLIG SUPER FLOW 101N is brown liquid admixture ready to used fir high workability retention with set retarding effect complies with  ASTM C 494 type-A, G and B.

Purpose and application
To produce workability and to make concrete virtually self leaing and requies no vibration during placing or may also to be used promote high ultimate strength by large water reduction (UP to 20%) which maintain workability for pumping, pre-stressed and structural concrete.

Advantages

• Controls set retardation with optimum dosages.
• Compatible with all type of  cement.
• Better slump retention to achieve pumpable concrete.
• Increase ultimate strength with maximum water reduction.

Dosages/Uses
It is better go for trial mix to determine the optimum dose generally dosed 0.9 to 1.6% by weight of cemnet enhanced upto 3.5 % depending upon climate condition.

Safety
PCP-NAPLIG FLOW 100N is non toxic , non flammable and non hazardous. However, any  splash on the hum7an body should be washed out immmediatly with plenty of water.